City guide

Plumbers in Tempe, AZ

What plumbing in Tempe, AZ depends on: the age of local homes, winter freezes, rainfall and the water utility. Facts below come from official sources. Call to be connected with a local plumber.

Population
About 190,114 residents (U.S. Census Bureau 2024 estimate)
County
Maricopa County, Arizona
Homes
Median year built 1984; 41% of homes built before 1980, 25% since 2000
Housing mix
38% detached single-family houses; 42% of homes owner-occupied
Home heating fuel
Electricity 78%, utility gas 19%
Winter
Average winter daily low 39°F; about 10 nights a year at or below 32°F
Summer
Average summer daily high 105°F; about 179 days a year at 90°F or hotter
Precipitation
About 8.5 in of precipitation a year
Flash floods 2015-2024
387 flash flood reports in Maricopa County
Electric utility
Salt River Project serves most local ZIP codes; average residential rate about 12.5 cents per kWh (2023)
ZIP codes
85281, 85282, 85283, 85284

Plumbing in Tempe: what the local numbers say

The median home in Tempe dates to 1984, a period when builders were moving from copper to plastic pipe. In homes like these, ask whether the supply lines are copper, CPVC or PEX, since each ages differently: copper may develop pinholes, CPVC can turn brittle, and PEX is sensitive to certain fittings. A local plumber can identify the material and suggest what to watch for.

Winters in Tempe are mild, with typical lows near 39°F and few freezing nights. The risk is not constant frozen pipes but rare cold snaps that find homes unprepared: uninsulated lines, exposed pipes near the water heater and outdoor valves. Keep foam covers on hand and know your main shutoff. If a pipe splits, shut off the water first, then call a plumber.

Because electricity is the dominant heating fuel in Tempe (78% of homes), electric water heaters are the norm. Without venting needs, they can go in closets, garages or attics, where a leaking tank can do quiet damage. A drain pan with a drain line, a working shutoff valve and a pressure relief valve are worth asking a local plumber to check.

With 387 flash flood reports in Maricopa County over 2015 to 2024, homes in Tempe may face storm-driven backups at some point. Floor drains and basement bathrooms are the first places sewage backs up. Ask a plumber about a backwater valve, a check valve on the sump pump and a clear route for discharge water. Photograph the shutoff and cleanout locations now.

About 8.5 in of rain and snow falls in Tempe in a typical year, so mineral content in the water is often high. That can mean scale in tank water heaters, clogged aerators and shortened appliance life. Sediment can make a tank rumble and reduce hot water capacity. Annual flushing, plus a look at the anode rod, is a task worth asking a local plumber about.

Common plumbing jobs in Tempe

Before you hire anyone in Tempe, ask whether the job needs a permit, get the scope and price in writing, and verify the plumber's license and insurance with the state or local authority. The Arizona plumbing guide explains where to start.

Common questions in Tempe

What plumbing helps protect a home from sewer backup during floods in Tempe?

A backwater valve on the sewer line, a sump pump with battery backup and a known main shutoff are common measures. Maricopa County had 387 flash flood reports in 2015 to 2024. Whether a valve suits your home depends on your drain layout and local code, so ask a plumber and check permit rules.

Does hard water damage plumbing in a dry area like Tempe?

Dry regions often have mineral-rich water. Scale can build up in water heaters, faucets and appliances and may reduce their efficiency and lifespan. Tempe gets about 8.5 in of precipitation a year. Your utility's water quality report lists hardness; flush the tank each year and ask a plumber about options for your home.

Other Arizona cities

Call (844) 609-3677