City guide

Plumbers in Richardson, TX

What plumbing in Richardson, TX depends on: the age of local homes, winter freezes, rainfall and the water utility. Facts below come from official sources. Call to be connected with a local plumber.

Population
About 118,221 residents (U.S. Census Bureau 2024 estimate)
County
Dallas County, Texas
Homes
Median year built 1986; 44% of homes built before 1980, 31% since 2000
Housing mix
54% detached single-family houses; 51% of homes owner-occupied
Home heating fuel
Electricity 53%, utility gas 45%
Winter
Average winter daily low 38°F; about 35 nights a year at or below 32°F
Summer
Average summer daily high 93°F; about 93 days a year at 90°F or hotter
Precipitation
About 40.1 in of precipitation a year; about 1.7 in of snowfall
Flash floods 2015-2024
103 flash flood reports in Dallas County
ZIP codes
75080, 75081, 75082

Plumbing in Richardson: what the local numbers say

With a median build year around 1986, a typical home in Richardson was plumbed in the 1980s or 1990s. Some homes from that period used polybutylene supply pipe, which was installed until about the mid-1990s and has been linked to leaks at its fittings. Others have copper, early CPVC or PEX. A plumber can usually tell which you have by looking at the pipes near the water heater.

Occasional freezing nights are enough to cause trouble in Richardson, which sees about 35 of them and roughly 2,290 heating degree days. Because freezes are not constant, many homes lack the protection found in colder regions. Learn where your main shutoff is, insulate exposed pipes and know how to drain outdoor lines. If a pipe does split, shutting off the water quickly limits the damage.

A mix of gas (45%), electric (53%) and delivered fuels heats homes across Richardson, so there is no standard water heater setup. Check the tag on your unit for the fuel and capacity, and the serial number, which many manufacturers use to encode age. A local plumber can tell you what a like-for-like replacement would need in your house.

With 103 flash flood reports in Dallas County over 2015 to 2024, homes in Richardson may face storm-driven backups at some point. Floor drains and basement bathrooms are the first places sewage backs up. Ask a plumber about a backwater valve, a check valve on the sump pump and a clear route for discharge water. Photograph the shutoff and cleanout locations now.

Richardson receives about 40.1 in of precipitation a year, enough to keep drainage, gutters and sewer lines busy through much of the year. Tree roots seek moisture and can enter older clay or cast iron sewer joints, and heavy rain can overload a main line. Slow drains in several fixtures, gurgling or damp spots in the yard are signs to ask a plumber to camera the line.

Common plumbing jobs in Richardson

Before you hire anyone in Richardson, ask whether the job needs a permit, get the scope and price in writing, and verify the plumber's license and insurance with the state or local authority. The Texas plumbing guide explains where to start.

Common questions in Richardson

Do I need to worry about frozen pipes in Richardson?

Occasional freezes happen, and homes built for milder weather often have exposed lines. Richardson sees about 35 freezing nights in a typical year. Before a forecast freeze, cover spigots, disconnect hoses and insulate pipes in attics, garages and exterior walls. Know the location of your main shutoff so you can stop water quickly if a pipe splits.

What plumbing helps protect a home from sewer backup during floods in Richardson?

A backwater valve on the sewer line, a sump pump with battery backup and a known main shutoff are common measures. Dallas County had 103 flash flood reports in 2015 to 2024. Whether a valve suits your home depends on your drain layout and local code, so ask a plumber and check permit rules.

Other Texas cities

Call (844) 609-3677